Which wage determination applies to my project in Gallatin County?

The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new building work in Gallatin County, MT, the current active determination is MT20260033. Verify with your contracting officer before bidding or paying.

How often do these rates change?

DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified May 18, 2026.

What is the difference between the base rate and the fringe rate?

The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 39% of base.

My classification is not listed for Gallatin County. What do I do?

If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.

What counts as building construction?

Building covers sheltered enclosures with walk-in access, such as offices, schools, and warehouses, including incidental site work. Single-family and low-rise residential work uses the residential schedule instead.

Does the federal rate or the Montana state prevailing wage apply?

They are separate systems. Davis-Bacon rates apply to federally funded or assisted work; a state prevailing wage law can apply to state-funded work. A project can be covered by both, in which case the higher rate for each classification effectively controls. This page shows the federal determination only.

Is the WH-347 form mandatory?

The WH-347 itself is optional; what is mandatory on covered work is submitting weekly certified payroll with the same information and a signed Statement of Compliance. Most contractors use the WH-347 layout because agencies expect it.

PREVAILWAGE

Pulling the rate table…

Building prevailing wage rates for Gallatin County, MT | PrevailWage

Building prevailing wage rates for Gallatin County, MT

ELEVATOR MECHANIC FOOTNOTE leads the building schedule for Gallatin County, MT at $67.61 base plus $38.44 fringe. The active federal wage determination covering building construction in Gallatin County, MT lists 22 classifications with published rates, base pay from $14.10 to $67.61 per hour. The determination was last modified May 18, 2026.

Classifications: 22; with published rates
Median base: $24.96; per hour
Median fringe: 39%; of base pay
Last modified: May 18, 2026

Published rates

Classification	Base	Fringe	WD
BOILERMAKER	$38.75	$32.31	MT20260033
BRICKLAYER	$30.55	$15.75	MT20260033
CARPENTER(Includes Acoustical Ceiling Installation, Drywall Finishing/Taping, Drywall Hanging and Formwork). ZONE DEFINITION: THE HOURLY RATE APPLICABLE TO EACH PROJECT IS DETERMINED BY THE MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL ROUTE FROM THE cOUNTY cOURTHOUSE OF THE FOLLOWING TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, LEWISTON, MILES CITY, AND MISSOULA. ZONE 1: 0 TO 30 MILES-BASE RATE. ZONE 2: 31 TO 60 MILES - $4.00. ZONE 3: OVER 60 MILES - $CARPENTER (Includes Acoustical Ceiling Installation, Drywall Finishing/Taping, Drywall Hanging and Formwork). ZONE DEFINITION: THE HOURLY RATE APPLICABLE TO EACH PROJECT IS DETERMINED BY THE MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL ROUTE FROM THE cOUNTY cOURTHOUSE OF THE FOLLOWING TOWNS TO THE CENTER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, LEWISTON, MILES CITY, AND MISSOULA. ZONE 1: 0 TO 30 MILES-BASE RATE. ZONE 2: 31 TO 60 MILES - $4.00. ZONE 3: OVER 60 MILES - $6.00

The highest published base on this schedule belongs to ELEVATOR MECHANIC FOOTNOTE at $67.61 per hour plus $38.44 fringe; the schedule's median base is $24.96.

The most recent modification to the governing determination is dated May 18, 2026. DOL's weekly publication cycle means further modifications can post on any Friday.

This schedule mixes sources: 45% of lines carry union identifiers and the rest are survey-based. Two crews on one site can be governed by rates that update on entirely different rhythms.

Using these rates

Read the modification number

A wage determination is cited as number plus modification, for example MT20260033 Mod dated May 18, 2026. Your certified payroll should reflect the determination in your contract, not necessarily the newest one.

Put the WD in your bid file

Save the full determination text with your bid papers the day you price the job. If rates change later, the contract determination is your record of what you bid against.

Check rates the Friday before payroll

DOL publishes modifications weekly, generally Fridays. A quick check before running payroll catches a mid-project modification before it shows up in an agency review instead.

Match classifications by duties, not titles

The classification that applies is determined by the work performed, not the worker's title. A foreman who works with the tools is generally due the rate for the hours on the tools.

Fringe crediting basics

You can meet the fringe obligation with bona fide benefit plan contributions, cash, or a combination. Track the hourly equivalent of what you contribute; agencies ask for the math.

Statement of Compliance wording

The signed Statement of Compliance may be the WH-347 back page or another document with identical wording. The signature is a federal certification by your company's officer; accuracy is on the certifier.

Questions

Which wage determination applies to my project in Gallatin County?: The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new building work in Gallatin County, MT, the current active determination is MT20260033. Verify with your contracting officer before bidding or paying.
How often do these rates change?: DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified May 18, 2026.
What is the difference between the base rate and the fringe rate?: The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 39% of base.
My classification is not listed for Gallatin County. What do I do?: If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.
What counts as building construction?: Building covers sheltered enclosures with walk-in access, such as offices, schools, and warehouses, including incidental site work. Single-family and low-rise residential work uses the residential schedule instead.
Does the federal rate or the Montana state prevailing wage apply?

Sources

MT20260033 rev. 1 · modified May 18, 2026

Synced from SAM.gov July 18, 2026. The wage determination incorporated into your contract is the legally operative document.