Which wage determination applies to my project in Cascade County?

The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new building work in Cascade County, MT, the current active determination is MT20260062. Verify with your contracting officer before bidding or paying.

How often do these rates change?

DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified July 30, 2026.

What is the difference between the base rate and the fringe rate?

The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 49% of base.

My classification is not listed for Cascade County. What do I do?

If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.

What counts as building construction?

Building covers sheltered enclosures with walk-in access, such as offices, schools, and warehouses, including incidental site work. Single-family and low-rise residential work uses the residential schedule instead.

Does the federal rate or the Montana state prevailing wage apply?

They are separate systems. Davis-Bacon rates apply to federally funded or assisted work; a state prevailing wage law can apply to state-funded work. A project can be covered by both, in which case the higher rate for each classification effectively controls. This page shows the federal determination only.

Is the WH-347 form mandatory?

The WH-347 itself is optional; what is mandatory on covered work is submitting weekly certified payroll with the same information and a signed Statement of Compliance. Most contractors use the WH-347 layout because agencies expect it.

PREVAILWAGE

Pulling the rate table…

Building prevailing wage rates for Cascade County, MT | PrevailWage

Building prevailing wage rates for Cascade County, MT

DOL marked wage determination MT20260062 modified July 30, 2026 (revision 2). Verify against the source below before filing.

Rates on this page changed recently: the governing determination carries a modification dated July 30, 2026. The active federal wage determination covering building construction in Cascade County, MT lists 19 classifications with published rates, base pay from $14.62 to $67.61 per hour. The determination was last modified July 30, 2026.

Classifications: 19; with published rates
Median base: $32.88; per hour
Median fringe: 49%; of base pay
Last modified: July 30, 2026

Published rates

Classification	Base	Fringe	WD
BOILERMAKER	$38.75	$32.31	MT20260062
BRICKLAYER	$33.11	$17.18	MT20260062
CARPENTERINCLUDES DRYWALL HANGING AND FORMWORK ZONE DEFINITION: THE HOURLY RATE APPLICABLE TO EACH PROJECT IS DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL ROUTE FROM THE COUNTY COURTHOUSE OF THE FOLLOWING TOWNS TO THE CETER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, LEWISTON, MILES CITY, AND MISSOULA ZONE 1: 0 TO 30 MILES - BASE RATE ZONE 2: 31 TO 60 MILES - $4.00 ZONE 3: OVER 60 MILES - $6.00CARPENTER: INCLUDES DRYWALL HANGING AND FORMWORK ZONE DEFINITION: THE HOURLY RATE APPLICABLE TO EACH PROJECT IS DETERMINED BY MEASURING THE ROAD MILES OVER THE SHORTEST PRACTICAL ROUTE FROM THE COUNTY COURTHOUSE OF THE FOLLOWING TOWNS TO THE CETER OF THE JOB: BILLINGS, BOZEMAN, BUTTE, GREAT FALLS, HELENA, KALISPELL, LEWISTON, MILES CITY, AND MISSOULA ZONE 1: 0 TO 30 MILES - BASE RATE ZONE 2: 31 TO 60 MILES - $4.00 ZONE 3: OVER 60 MILES - $6.00

Across the 19 published classifications for building work in Cascade County, MT, base pay spans $14.62 to $67.61 per hour with a median of $32.88.

The governing determination was modified July 30, 2026, within the last 30 days. Contractors mid-bid in Cascade County should re-check figures against the determination text before submitting.

79% of the rate lines here carry union local identifiers, so the published figures track negotiated agreements, which is why some classifications carry high fringe amounts relative to base.

Using these rates

Read the modification number

A wage determination is cited as number plus modification, for example MT20260062 Mod dated July 30, 2026. Your certified payroll should reflect the determination in your contract, not necessarily the newest one.

Put the WD in your bid file

Save the full determination text with your bid papers the day you price the job. If rates change later, the contract determination is your record of what you bid against.

Check rates the Friday before payroll

DOL publishes modifications weekly, generally Fridays. A quick check before running payroll catches a mid-project modification before it shows up in an agency review instead.

Match classifications by duties, not titles

The classification that applies is determined by the work performed, not the worker's title. A foreman who works with the tools is generally due the rate for the hours on the tools.

Fringe crediting basics

You can meet the fringe obligation with bona fide benefit plan contributions, cash, or a combination. Track the hourly equivalent of what you contribute; agencies ask for the math.

Statement of Compliance wording

The signed Statement of Compliance may be the WH-347 back page or another document with identical wording. The signature is a federal certification by your company's officer; accuracy is on the certifier.

Questions

Which wage determination applies to my project in Cascade County?: The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new building work in Cascade County, MT, the current active determination is MT20260062. Verify with your contracting officer before bidding or paying.
How often do these rates change?: DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified July 30, 2026.
What is the difference between the base rate and the fringe rate?: The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 49% of base.
My classification is not listed for Cascade County. What do I do?: If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.
What counts as building construction?: Building covers sheltered enclosures with walk-in access, such as offices, schools, and warehouses, including incidental site work. Single-family and low-rise residential work uses the residential schedule instead.
Does the federal rate or the Montana state prevailing wage apply?

Sources

MT20260062 rev. 2 · modified July 30, 2026

Synced from SAM.gov August 1, 2026. The wage determination incorporated into your contract is the legally operative document.