Which wage determination applies to my project in Starke County?

The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new heavy work in Starke County, IN, the current active determination is IN20260006. Verify with your contracting officer before bidding or paying.

How often do these rates change?

DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified July 30, 2026.

What is the difference between the base rate and the fringe rate?

The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 59% of base.

My classification is not listed for Starke County. What do I do?

If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.

What counts as heavy construction?

Heavy covers projects that are not building, residential, or highway, such as water and sewer lines, dams, and flood control. Agencies sometimes split it further; the contract states which schedule applies.

Does the federal rate or the Indiana state prevailing wage apply?

They are separate systems. Davis-Bacon rates apply to federally funded or assisted work; a state prevailing wage law can apply to state-funded work. A project can be covered by both, in which case the higher rate for each classification effectively controls. This page shows the federal determination only.

Is the WH-347 form mandatory?

The WH-347 itself is optional; what is mandatory on covered work is submitting weekly certified payroll with the same information and a signed Statement of Compliance. Most contractors use the WH-347 layout because agencies expect it.

PREVAILWAGE

Pulling the rate table…

Heavy prevailing wage rates for Starke County, IN | PrevailWage

Heavy prevailing wage rates for Starke County, IN

LINE CONSTRUCTION leads the heavy schedule for Starke County, IN at $60.15 base plus $26.90 fringe. The active federal wage determination covering heavy construction in Starke County, IN lists 274 classifications with published rates, base pay from $19.80 to $60.15 per hour. The determination was last modified July 30, 2026.

Classifications: 274; with published rates
Median base: $34.35; per hour
Median fringe: 59%; of base pay
Last modified: July 30, 2026

Published rates

Classification	Base	Fringe	WD
ASBESTOS WORKER/HEAT & FROST INSULATORINCLUDES APPLICATION OF ALL INSULATING MATERIALS, PROTECTIVE COVERINGS, COATINGS AND FINISHINGS TO ALL TYPES OF MECHANICAL SYSTEMS (BROWN, BARTHOLOMEW, BENTON, BOONE, CARROLL, CASS, CLAY, CLINTON, DECATUR, DELAWARE, ELKHART. FOUNTAIN, FULTON, GREENE, HAMILTON, HANCOCK, HENDRICKS, HENRY, HOWARD, JASPER, JOHNSON, KOSCIUSKO, LAGRANGE, MARSHALL, MADISON, MARION, MONROE, MONTGOMERY, MORGAN, OWEN, PARKE, PULASKI, PUTNAM, RUSH, SHELBY, STARKE, TIPPECANOE, TI	$40.20	$25.68	IN20260006
ASBESTOS WORKER/HEAT & FROST INSULATOR(NEWTON COUNTY)	$56.02	$37.24	IN20260006
ASBESTOS WORKER/HEAT & FROST INSULATORINCLUDES APPLICATION OF ALL INSULATING MATERIALS PROTECTIVE COVERINGS, COATINGS AN FINISHES TO ALL TYPES OF MECHANICAL SYSTEMS. ALSO THE APPLICATION OF FIRESTOPPING, MATERIAL OPENINGS AND PENETRATIONS IN WALLS, FLOORS, CEILINGS, CURTAIN WALLS AND ALL LEAD ABATEMENT. (DAVIESS, DUBOIS, GIBSON, KNOX, MARTIN, PIKE, POSEY, SPENCER, SULLIVAN, VANDERBURGH AND WARRICK COUNTIES)

The most recent modification to the governing determination is dated July 30, 2026. DOL's weekly publication cycle means further modifications can post on any Friday.

With 274 classifications carrying published rates, this is a comparatively deep schedule; most trades a heavy project needs appear without a conformance request.

100% of the rate lines here carry union local identifiers, so the published figures track negotiated agreements, which is why some classifications carry high fringe amounts relative to base.

Using these rates

Read the modification number

A wage determination is cited as number plus modification, for example IN20260006 Mod dated July 30, 2026. Your certified payroll should reflect the determination in your contract, not necessarily the newest one.

Put the WD in your bid file

Save the full determination text with your bid papers the day you price the job. If rates change later, the contract determination is your record of what you bid against.

Check rates the Friday before payroll

DOL publishes modifications weekly, generally Fridays. A quick check before running payroll catches a mid-project modification before it shows up in an agency review instead.

Match classifications by duties, not titles

The classification that applies is determined by the work performed, not the worker's title. A foreman who works with the tools is generally due the rate for the hours on the tools.

Fringe crediting basics

You can meet the fringe obligation with bona fide benefit plan contributions, cash, or a combination. Track the hourly equivalent of what you contribute; agencies ask for the math.

Statement of Compliance wording

The signed Statement of Compliance may be the WH-347 back page or another document with identical wording. The signature is a federal certification by your company's officer; accuracy is on the certifier.

Questions

Which wage determination applies to my project in Starke County?: The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new heavy work in Starke County, IN, the current active determination is IN20260006. Verify with your contracting officer before bidding or paying.
How often do these rates change?: DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified July 30, 2026.
What is the difference between the base rate and the fringe rate?: The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 59% of base.
My classification is not listed for Starke County. What do I do?: If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.
What counts as heavy construction?: Heavy covers projects that are not building, residential, or highway, such as water and sewer lines, dams, and flood control. Agencies sometimes split it further; the contract states which schedule applies.
Does the federal rate or the Indiana state prevailing wage apply?

Sources

IN20260006 rev. 3 · modified July 30, 2026

Synced from SAM.gov August 1, 2026. The wage determination incorporated into your contract is the legally operative document.