Which wage determination applies to my project in Custer County?

The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new heavy work in Custer County, ID, the current active determination is ID20260047. Verify with your contracting officer before bidding or paying.

How often do these rates change?

DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified May 18, 2026.

What is the difference between the base rate and the fringe rate?

The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 43% of base.

My classification is not listed for Custer County. What do I do?

If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.

What counts as heavy construction?

Heavy covers projects that are not building, residential, or highway, such as water and sewer lines, dams, and flood control. Agencies sometimes split it further; the contract states which schedule applies.

Does the federal rate or the Idaho state prevailing wage apply?

They are separate systems. Davis-Bacon rates apply to federally funded or assisted work; a state prevailing wage law can apply to state-funded work. A project can be covered by both, in which case the higher rate for each classification effectively controls. This page shows the federal determination only.

Is the WH-347 form mandatory?

The WH-347 itself is optional; what is mandatory on covered work is submitting weekly certified payroll with the same information and a signed Statement of Compliance. Most contractors use the WH-347 layout because agencies expect it.

PREVAILWAGE

Pulling the rate table…

Heavy prevailing wage rates for Custer County, ID | PrevailWage

Heavy prevailing wage rates for Custer County, ID

ELECTRICIAN leads the heavy schedule for Custer County, ID at $40.00 base plus $18.74 fringe. The active federal wage determination covering heavy construction in Custer County, ID lists 25 classifications with published rates, base pay from $17.00 to $40.00 per hour. The determination was last modified May 18, 2026.

Classifications: 25; with published rates
Median base: $24.94; per hour
Median fringe: 43%; of base pay
Last modified: May 18, 2026

Published rates

Classification	Base	Fringe	WD
CARPENTEREXCLUDES FORM WORK (ADAMS, BEAR LAKE, BINGHAM, BOISE, BUTTE, BONNEVILLE, CAMAS, CARIBOU, CASSIA, CLARK, CUSTER, ELMORE, FRANKLIN, FREMONT, GEM, GOODING, IDAHO (SOUTH OF THE 46TH PARALLEL), JEFFERSON, JEROME, LEMHI, LINCOLN, MADISON, MINIDOKA, ONEIDA, OWYHEE, PAYETTE, POWER, TETON, TWIN FALLS, VALLEY AND WASHINGTON COUNTIES) ZONE PAY: ZONE 1 0-30 MILES: FREE ZONE 2 MORE THAN 30-60 MILES: $2.00/PER HOUR ZONE 3 MORE THAN 60 MILES: $3.00/PER HOUR IF A PROJECT IS LOCATED IN MORE THAN ONE ZONE THE LOWCARPENTER: EXCLUDES FORM WORK (ADAMS, BEAR LAKE, BINGHAM, BOISE, BUTTE, BONNEVILLE, CAMAS, CARIBOU, CASSIA, CLARK, CUSTER, ELMORE, FRANKLIN, FREMONT, GEM, GOODING, IDAHO (SOUTH OF THE 46TH PARALLEL), JEFFERSON, JEROME, LEMHI, LINCOLN, MADISON, MINIDOKA, ONEIDA, OWYHEE, PAYETTE, POWER, TETON, TWIN FALLS, VALLEY AND WASHINGTON COUNTIES) ZONE PAY: ZONE 1 0-30 MILES: FREE ZONE 2 MORE THAN 30-60 MILES: $2.00/PER HOUR ZONE 3 MORE THAN 60 MILES: $3.00/PER HOUR IF A PROJECT IS LOCATED IN MORE THAN ONE ZONE THE LOWER ZONE RATE SHALL APPLY ZONES SHALL BE MEASURED FROM THE THE FOLLOWING U.S. POST OFFICES: BOISE: 304 N. 8TH STREET TWIN FALLS: 253 2ND AVE. WEST POCATELLO: CLARK STREET IDAHO FALLS: 875 NORTH CAPITAL AVE	$35.68	$18.24

The highest published base on this schedule belongs to ELECTRICIAN at $40.00 per hour plus $18.74 fringe; the schedule's median base is $24.94.

This schedule has been stable recently; the last modification is dated May 18, 2026. Stability is not permanence: annual editions and mid-year modifications can reset rates in Custer County without local notice.

This schedule mixes sources: 40% of lines carry union identifiers and the rest are survey-based. Two crews on one site can be governed by rates that update on entirely different rhythms.

Using these rates

Read the modification number

A wage determination is cited as number plus modification, for example ID20260047 Mod dated May 18, 2026. Your certified payroll should reflect the determination in your contract, not necessarily the newest one.

Put the WD in your bid file

Save the full determination text with your bid papers the day you price the job. If rates change later, the contract determination is your record of what you bid against.

Match classifications by duties, not titles

The classification that applies is determined by the work performed, not the worker's title. A foreman who works with the tools is generally due the rate for the hours on the tools.

Fringe crediting basics

You can meet the fringe obligation with bona fide benefit plan contributions, cash, or a combination. Track the hourly equivalent of what you contribute; agencies ask for the math.

Statement of Compliance wording

The signed Statement of Compliance may be the WH-347 back page or another document with identical wording. The signature is a federal certification by your company's officer; accuracy is on the certifier.

Use last-4 SSN only

Certified payroll uses the employee's name and an individually identifying number, normally the last four digits of the Social Security number. Full SSNs do not belong on submitted payrolls.

Questions

Which wage determination applies to my project in Custer County?: The wage determination incorporated into your contract is the one that governs, per 29 CFR 1.6. For new heavy work in Custer County, ID, the current active determination is ID20260047. Verify with your contracting officer before bidding or paying.
How often do these rates change?: DOL publishes wage determination modifications weekly, generally on Fridays. The determination behind this page was last modified May 18, 2026.
What is the difference between the base rate and the fringe rate?: The base rate is the minimum hourly wage; the fringe amount is an additional hourly benefit obligation you can meet with bona fide benefit contributions or pay in cash. On this schedule the median fringe is about 43% of base.
My classification is not listed for Custer County. What do I do?: If the work classification you need is not on the determination, the contractor requests a conformance (additional classification and rate) through the contracting agency using Standard Form 1444. Do not substitute a similar-sounding classification.
What counts as heavy construction?: Heavy covers projects that are not building, residential, or highway, such as water and sewer lines, dams, and flood control. Agencies sometimes split it further; the contract states which schedule applies.
Does the federal rate or the Idaho state prevailing wage apply?

Sources

ID20260047 rev. 2 · modified May 18, 2026

Synced from SAM.gov July 18, 2026. The wage determination incorporated into your contract is the legally operative document.